FREE DELIVERY ON SELECTED ORDERS OVER £65*

Snowstorm (Non-Caustic) 1 Litre - JENNYCHEM
Snowstorm (Non-Caustic) 5 Litre - JENNYCHEM
Snowstorm (Non-Caustic) - JENNYCHEM
Snowstorm (Non-Caustic) 20 Litre - JENNYCHEM
Snowstorm (Non-Caustic) 210 Litre - JENNYCHEM
Snowstorm (Non-Caustic) 1000 Litre - JENNYCHEM

Snowstorm (Non-Caustic)

Product Code: G7080U
Snowstorm Non-Caustic is a powerful foam that effectively cleans vehicles while protecting wax, sealants, and ceramic coatings.
£13.25 per litre
Available for in-store pick up
£13.25
£13.25
£13.25 per litre
£13.25
£13.25
In-store pickup available at checkout
Product Image
Product Image
  • Dilute the Snowstorm with water in a foam lance or foam sprayer. We recommend a ratio of 1 part Maxi Mousse to 4 parts water.
    01

    Dilute the Snowstorm with water in a foam lance or foam sprayer. We recommend a ratio of 1 part Maxi Mousse to 4 parts water.

  • Spray an even layer of foam on the vehicle exterior, covering all panels. Let it sit for 3-5 minutes. Do not allow the product to dry.
    02

    Spray an even layer of foam on the vehicle exterior, covering all panels. Let it sit for 3-5 minutes. Do not allow the product to dry.

  • For heavily soiled spots such as wheel arches, lower sills, or bug-splattered areas, gently agitate with a soft wash mitt or sponge.
    03

    For heavily soiled spots such as wheel arches, lower sills, or bug-splattered areas, gently agitate with a soft wash mitt or sponge.

  • Use a high-pressure washer to rinse off all foam and loosened dirt. Starting from the top and working your way down.
    04

    Use a high-pressure washer to rinse off all foam and loosened dirt. Starting from the top and working your way down.

  • Immediately after rinsing, use a clean microfibre drying towel with smooth, sweeping motions to prevent water spots and streaking.
    05

    Immediately after rinsing, use a clean microfibre drying towel with smooth, sweeping motions to prevent water spots and streaking.