Snowstorm Maxi Mousse
Expected standard delivery by Tuesday 15 September
PRODUCT INFORMATION
When you need serious cleaning power, Snowstorm delivers. Engineered with professional detailers and fleet operators in mind, this high-alkaline pH 13 pre-wash cuts through heavy road grime, salt, and traffic film with ease — making even the dirtiest vehicles look spotless, fast.
Trusted in commercial environments for its speed and efficiency, Snowstorm dramatically reduces contact washing time by removing up to 95% of dirt before you even touch the paint. Whether you’re maintaining a fleet or washing your daily driver, you’ll see the same deep-cleaning results — without the hard work.
Formulated for use on unprotected vehicles, Snowstorm is also safe for real ceramic coatings and most paint finishes. For maximum protection, simply follow up with a spray sealant such as Hyper Seal after cleaning. Plastic and metal trim may be affected by strong chemicals. Use regular Snow Foam if unsure.
IMPORTANT
Put on protective gloves and eyewear to shield from splashes.
Store product in a cool and dry place, out of direct sunlight.
Potentially corrosive to Zinc, Aluminium and galvanised metals.
Not safe on aluminium. Please use our Non-Caustic Snowstorm.
Shake container well before proceeding to use this product.
Works Effectively On
How To Use
01Dilute the Snowstorm with water in a foam lance or foam sprayer. We recommend a ratio of 1 part Maxi Mousse to 4 parts water.
02Spray an even layer of foam on the vehicle exterior, covering all panels. Let it sit for 3-5 minutes. Do not allow the product to dry.
03For heavily soiled spots such as wheel arches, lower sills, or bug-splattered areas, gently agitate with a soft wash mitt or sponge.
04Use a high-pressure washer to rinse off all foam and loosened dirt. Starting from the top and working your way down.
05Immediately after rinsing, use a clean microfibre drying towel with smooth, sweeping motions to prevent water spots and streaking.
- 01
Dilute the Snowstorm with water in a foam lance or foam sprayer. We recommend a ratio of 1 part Maxi Mousse to 4 parts water.
- 02
Spray an even layer of foam on the vehicle exterior, covering all panels. Let it sit for 3-5 minutes. Do not allow the product to dry.
- 03
For heavily soiled spots such as wheel arches, lower sills, or bug-splattered areas, gently agitate with a soft wash mitt or sponge.
- 04
Use a high-pressure washer to rinse off all foam and loosened dirt. Starting from the top and working your way down.
- 05
Immediately after rinsing, use a clean microfibre drying towel with smooth, sweeping motions to prevent water spots and streaking.
WATCH IT WORK
Frequently Asked Questions
RELATED PRODUCTS
RELATED PRODUCTS
MANUFACTURED WITHIN THE UK
CHEMICAL MIXING
Raw materials are combined in precise ratios using industrial mixers or blending equipment. The process is controlled with parameters like temperature, mixing speed and time monitored to ensure a consistent formulation.
PRODUCT POURING
The prepared mixture is transferred into designated containers using automated or controlled pouring systems. This step ensures accurate filling, minimises spillage and maintains manufacturing safety standards.
ORDER PACKING
The product is sealed in appropriate packaging such as bottles or drums to ensure safe storage and transport. Labels with product details are then applied, which is then securely packed into a parcel before leaving the site.
FORMULATED & MANUFACTURED WITHIN THE UK
CHEMICAL MIXING
Raw materials are combined in precise ratios using industrial mixers or blending equipment. The process is controlled with parameters like temperature, mixing speed and time monitored to ensure a consistent formulation.
PRODUCT POURING
The prepared mixture is transferred into designated containers using automated or controlled pouring systems. This step ensures accurate filling, minimises spillage and maintains manufacturing safety standards.
ORDER PACKING
The product is sealed in appropriate packaging such as bottles or drums to ensure safe storage and transport. Labels with product details are then applied, which is then securely packed into a parcel before leaving the site.