Traffic Film Remover | TFR Cleaner

If you are looking for an easy, effective and safe TFR or the best way to wash your vehicle, then you have arrived in the right place. We offer one of the best car care traffic film remover (TFR) products that will give your car a brand-new look without damaging its paintwork.

A Powerful Chemical Cleaner

A traffic film remover, also known as a TFR, is a type of powerful chemical cleaner that's used directly on the body of vehicles for cleaning purposes. You can use it with a snow foaming bottle through high power pressure cleaners.

Typically, traffic film remover is a unique concentration of different chemicals which work in combination to achieve a sole purpose — make it ten times easier to remove grime and dirt from the surface of your car. Here at JennyChem, our TRF cleaner is powerful enough to make the dirt removal process even more comfortable for you.

The most significant benefit of using a traffic film remover is that it's way stronger than snow foam, car shampoos, wax, or pH neutral washes. It is one of the best ways to sanitise and clean, especially for farm, supermarket, and catering vehicles. It provides sterilised and clean surfaces by removing gunk and other foreign materials.

Traffic Film Removers - Best Vehicle Pre-Wash

We offer two different types of traffic film remover to serve our customers best with their pre-wash. It doesn't matter if you have cars with a lot of aluminium work or if they need heavy-duty degreasing work. Using our traffic film remover snow foam will provide your vehicle with a brand-new look.

Caustic Based TFR

The caustic based traffic film remover, TFR, in the range is specifically designed for heavy-duty degreasing and cleaning. It is best for industrial fleet vehicles, people who travel a lot, and off-road vehicles. It removes thick gunk, grime, and dirt efficiently and quickly, even from the clutch and engine compartment that tend to hold built-up grease.

Some of the caustic based TFR is available on the market also damage or dull the paint of your car. We only use the branded and high-end materials in our caustic based traffic film remover to ensure that it doesn't damage your vehicle's paintwork. We also advise our respective customers to get an extra wax layer applied to their vehicles for more protection after getting the vehicle washed with caustic based traffic film remover.

Non-Caustic Based TFR

Our special non-caustic TFR is made to achieve the same purpose and performance. It's even safer to use because it doesn't strip wax away from your vehicle like other products available on the market do. Our non-caustic based Traffic Film Remover TFR has a high pH value but is comparatively lower than caustic based traffic film removers. We recommend our customers who are particular about their vehicle or have tanker vehicles that contain more aluminium opt for non-caustic film remover TFR fluid. If you are a DIY enthusiast, then you can easily buy a 5-litre bottle or more than five litres of non-caustic TFR to wash your vehicle at home. Using it daily or weekly doesn't harm your vehicle's paint and provides a streak-free shine every time.

We stock the industry's best Car Snow Foams

Traffic Film Remover Basic Steps

There are many ways to use traffic film removers to remove your road grime for car cleaning or truck washing, but the easiest and most common way is using it with a pump sprayer.

For the best results, here are the steps listed below:

• Spray on the car surface as a pre-wash
• Let it sit
• Rinse very thoroughly with water until the gunk falls away. Pay extra attention to any stubborn area's.
• Make sure you wash a TFR off your car straight away, as it can stain and damage the paint if it’s left to dry.
• Rewash and Review the body with normal vehicle shampoo
• Rinse again with water
• Dry using our Microfibre towels
• Use our Car Care products to dress and seal your paintwork

If you don't have a pump spray kit, consider buying one if you're more of a DIY person. Additionally, using film remover traffic film remover without the necessary precautions can leave some damaging and unwanted results. The following tips will help you to avoid all the potential damages:

• Never use traffic film remover if the vehicle is in direct sunlight and warm; the surface of the vehicle mustn't be hot
• Wear recommended glasses and gloves to protect your eyes and skin
• Test the product on the most sensitive areas such as soft top, wheels, unpainted trim
• Rinse thoroughly and use normal vehicle shampoo afterwards
• Traffic Film Remover should be used infrequently - once every few months

With our extensive experience using TRF chemicals, we find it’s advisable to leave the solution on your vehicle for 3-6 minutes before the rinsing process. If you’re looking to go the extra mile, try agitating the TRF cleaner with a wash brush.

Rinsing traffic film remover is more efficient when you use water at high pressure. That’s not to say you’re utterly helpless without a pressure washer. It’s possible to do the job effectively with an everyday bucket and washer. However, you have to be deliberate about rinsing well.

A TRF cleaner can have a high alkaline concentration. In light of that, it’s hugely important to use protective goggles while using it. If you’ll be working in an enclosed area, better to double up with a protective face mask. This way, you can avoid splashback and inhalation.

For instance, if TRF chemical splashes on a bruise, it will sting. However, there’s no reason to worry about severe side effects. Many auto care experts use traffic film remover with zero side effects. As long as you take proper precautions, you’re good to go!

Still, Stuck? Please get in touch with our Customer Services Team who will be happy to assist.