Cutting Compounds
4.6 by15,203+ Reviews
Over 1,000,000+ Customer Orders
Product Code: CTCMLURevitalize your vehicle’s paint with Jennychem's three innovative cut compounds, designed by experts for a superior finish.
Expected standard delivery by Thursday 17 September
£12.90 per litre
Available for in-store pick up
£12.90
£12.90
£12.90 per litre
£12.90
£12.90
In-store pickup available at checkout
PRODUCT INFORMATION
Enhance your vehicle's paintwork with these three cut compounds from Jennychem, the ultimate final touch in our three-stage cutting compound system. Crafted by our expert technical team, our cut compounds stands out with its innovative diminishing abrasive chemistry.
IMPORTANT
Put on protective gloves and eyewear to shield from splashes.
Store product in a cool and dry place, out of direct sunlight.
Shake container well before proceeding to use this product.
How To Use
- Ensure the surface is clean, dry and free of contaminants.01
- Tape off any plastics or trim and perform a spot test, to determine the appropriate amount of compound needed.02
- Apply a small amount of product onto a hand applicator pad. If using a dual-action polisher use a fine cutting pad.03
- Apply the compound in sections evenly on the surface.04
- Using a dual-action polisher or rotary buffer, work the compound into the paintwork using slow, overlapping passes.05
- Check the progress after each section is overlapped, by wiping away any excess with a microfibre cloth.06
- Once satisfied with the correction wipe off the residue.07
- Inspect the treated paintwork under different lighting conditions, to ensure uniform correction and a smooth finish.08
- Ensure the surface is clean, dry and free of contaminants.01
- Tape off any plastics or trim and perform a spot test, to determine the appropriate amount of compound needed.02
- Apply a small amount of product onto a hand applicator pad. If using a dual-action polisher use a fine cutting pad.03
- Apply the compound in sections evenly on the surface.04
- Using a dual-action polisher or rotary buffer, work the compound into the paintwork using slow, overlapping passes.05
- Check the progress after each section is overlapped, by wiping away any excess with a microfibre cloth.06
- Once satisfied with the correction wipe off the residue.07
- Inspect the treated paintwork under different lighting conditions, to ensure uniform correction and a smooth finish.08
