Chassis Cleaner
Expected standard delivery by Tuesday 15 September
PRODUCT INFORMATION
A caustic based degreaser formulated for deep cleaning of vehicle chassis and engine bays. Engineered for professional use, this heavy duty cleaner effortlessly breaks down stubborn grease, oil, road grime and built-up dirt. Ideal for MOT centers and garages, it's perfect for prepping vehicles for inspection or routine maintenance. Suitable for use with hot or cold pressure washers and pre-wash sprayers, this cleaner delivers professional grade results.
DILUTION INFORMATION
General Cleaning: Mix 1 part cleaner with 20 parts water.
Deep Cleaning: Use product neat.
IMPORTANT
Not suitable for use on Galvanised Steel surfaces.
Not recommended for use on any painted surfaces.
Put on protective gloves and eyewear to shield from splashes.
Store product in a cool and dry place, out of direct sunlight.
How To Use
- Park vehicle on a flat surface with good ventilation, ensuring the engine is off and cool to the touch.01
- Mix the degreaser thoroughly with water, following the recommended dilution ratio for the level of cleaning required.02
- Fill the mixture into a hot or cold pressure washer system or use a pre-wash hand pump sprayer.03
- Spray the mixed solution onto the chassis, engine bay, or under body while avoiding paint and sensitive parts.04
- Let it sit for 5–10 minutes without it drying.05
- Agitate tough areas if needed, then rinse off with a hose or pressure washer making sure all residue is removed.06
- Let it air dry or wipe down and reapply if needed.07
- Park vehicle on a flat surface with good ventilation, ensuring the engine is off and cool to the touch.01
- Mix the degreaser thoroughly with water, following the recommended dilution ratio for the level of cleaning required.02
- Fill the mixture into a hot or cold pressure washer system or use a pre-wash hand pump sprayer.03
- Spray the mixed solution onto the chassis, engine bay, or under body while avoiding paint and sensitive parts.04
- Let it sit for 5–10 minutes without it drying.05
- Agitate tough areas if needed, then rinse off with a hose or pressure washer making sure all residue is removed.06
- Let it air dry or wipe down and reapply if needed.07
